 |
This article is a stub. You can help Stormworks: Build and Rescue Wiki by expanding it. |
Gyro [ edit page ]
| Gyro | |
| |
| Mass | 10 |
| Dimensions | 5x3x1 |
| Cost | $500 |
| Logic inputs | Bool (Starter), Number (Throttle) |
| Logic outputs | Number (Temperature), Number (RPS) |
| Connections | Roll (In), Pitch (In), Yaw (In), Up/Down (In), Auto-hover (In), Stabilised Roll (Out), Stabilised Pitch (Out), Stabilised Yaw (Out), Stabilised Up/Down (Out) |
| Adjustable parameters | Min Throttle (0-100%), Max Throttle (0-100%), Roll (0-100%), Pitch (0-100%), Yaw (0-100%) |
Gyroscopes take control inputs and translate them into output values that can be fed into rotors for more controlled, stabilized flight. The gyro component comes equipped with an auto-hover mode that attempts to prevent the vehicle from drifting when no inputs are being given. The gyro also offers editable properties that allow for fine-tuning the sensitivity of the gyro's outputs on each individual axis.
Integration
Gyros are most easily integrated into helicopters where the rotor component has inputs that correspond to the outputs of the gyro. The outputs of pilot seats can be fed directly into gyros easily and allow for stable controls that feel natural and intuitive.